- High quality LCD Display: Designed to be easily visible to the driver in all conditions,
bright sunlight to night time driving.
- Laser Included: Front and rear laser detection module to be fitted to the windscreen
- Radar Input: Optional accessory sensor, available later in the year.
- Diffuser Input: Optional accessory emitter
Provides audible warning to the driver allowing Him/Her to concentrate on the road ahead. You can have a male or female voice or bleeped warning.
Will mute the sound from your car's audio system
when connected to the appropriate wire on the rear panel. (The vehicle's audio system must support this function e.g. mobile phone mute).
User friendly configuration software. Easily updates with the manufacturers website via your computers USB port.
May be hardwired to accessory position on the ignition key switch.
There are optional replacement fascia panels available to further customise the appearance of the TR20.
Configured via Computer
All of the TR series of driver safety aids have the option to configure either by using the internal menu options or alternatively the full range of adjustments may be carried out using your computer.
Motorway Options Automatic
Adjustable Overspeed Warning
Will allow the user to preset a speed that when exceeded an audible warning will sound e.g. 31mph, 71, 85, 100 or any other speed you choose.
Adjustable Audio Warning Levels:
The user may opt to exclude the warning of school locations.
Warnings Beep & Visual
All the warnings will be activated when a danger zone is located nearby, these may be adjusted in both operation mode and audio level in the menu options.
A highly accurate speedometer central to the display shows your current road speed.
indicates your direction of travel in the normal operational screen.
Laser detector Included
Front and rear laser detection module to be fitted to the windscreen.
- CD with Electronic Manual
- Cigar Lighter Power Lead
- USB Cable
- Cradle & Connect Box
- TR Unit
- Alcohol Wipe
- Sticky Pads
- Quick Start Card
- GPS Antenna
- Laser Detector (3m cable)
The TR unit (1) slides onto the mounting bracket (2) which comes with an adhesive pad to attach to the dashboard. This then plugs into the interconnect module (3) that you place underneath the dashboard. Similarly the GPS antenna (4) mounts of the dashboard with an adhesive pad and also plugs into the interconnect module along with the power lead (5). The power lead comes ready to plug into the 12v cigar lighter socket or you can remove this plug and hardwire the unit into the fuse box for power. Finally the laser sensor (6) suckers against the windscreen and plugs into the interconnect module to give you coverage for mobile camera vans. The neatest way to do this installation it to loosen the dashboad enabling you to tuck cables down the back of it connecting them underneath or to feed them through a joint in the dashboard at the front or through a small hole in an air vent. The USB cable (7) is used to update the database by plugging it into a computer and downloading the latest camera database for the manufacturers over the internet.
Full table on the Police Speed Traps page.
Accessories and spares for this product are available from our accessories page.
Any questions we haven't answered, then please email us or call for no obligation help on .